The SX adapter series is specifically designed for use with the Fiber-Lite light sources with a 1" ID (25mm) fiber port "nose piece", It positio...
View full details
The MX series is specifically designed for use with only the Fiber-Lite Mi-152 light source (25mm), and the Mi-LED and LMI-6000 with the -A2 optio...
View full details
The SX-B adapter series was specifically designed for use with the Fiber-Lite Mi-150 light sources with the 15mm fiber port "nose piece", and the ...
View full details
The ST-1 adapter is exclusively and specifically designed for use with the Fiber-Lite 190 light source. The ST-1 has a 3/8-32 thread that will fas...
View full details
Provides a very high intensity focused spot of light when used with our fiber optic goose neck assemblies. Friction fit and adjustable, the LH-759 ...
View full details
Provides a very high intensity focused spot of light when used with our EEG37 series fiber optic gooseneck assemblies. Threaded mount and adjustabl...
View full details
Provides a very high intensity focused spot of light when used with our fiber optic cable assemblies. Intended for fiber optics with active fiber b...
View full details
Provides a very high intensity focused spot of light when used with our fiber optic assemblies. Threaded mount and adjustable, the LH-501 spot lens...
View full details
Material is cast acrylic polished rod. Increased illumination throughput or stand-off distances anduniform lines of light are critical for line sca...
View full details
Six uniquely designed rigid probes with outside diameters ranging from 0.043 to 0.148 inches (1.1 to 3.7 mm). Hypodermic (hypo) stainless steel tub...
View full details
*NOTE: ALWAYS place an IR Filter in light path between the lamp and a color filter to prevent damage to color filter. Filter holders are designed t...
View full details
Filter holder FLH-DCH, FLH-PL/MI & SYF-100 will accept up to 2 filters with a 25mm diameter by 2.5mm thick. ALWAYS place an IR (heat mirror) Fi...
View full details
The adjustable MS-7 stand is for use the EEG37 series dual arm gooseneck fiber optic assembly. The fiber optic secures to the telescoping stand wit...
View full details
The adjustable MS-8 stand was designed for use the EEG4 series dual arm gooseneck fiber optic assembly, but will hold almost any single or dual fib...
View full details
Ai-4 unit requires MRB35-xx series fiber optic cable and illuminator (typically DC-950 or Mi-LED) Ai-2 unit requires B4-xx series fiber optic cable...
View full details
page under construction, specs and images coming soon For mini ring lights, MA31-PLZ, MA25-PLZ, MA4-PLZ For LPA 66mm LP-PLZ, For A37 60mm A37P-PLZ
